ROBOTICS
کاربر فعال مهندسی رباتیک
ezPIC Programmer for PICs and EEPROMs
by Sunrom Technologies (Product Code: 1001-3477)
ezPIC is low cost serial port programmer for PIC microcontroller and I2C EEPROM. The programmer does not need external power supply and it takes all necessary power and signal from RS232 Serial Port.
Features
* No external power supply required
* High quality 3M ZIF socket for easy insertion and removal of devices
* Software upgradeable for future PIC Microcontrollers
* Can program most PIC and I2C EEPROM devices
* In-Circuit Programming capability
* LED indication of Active programming mode.
by Sunrom Technologies (Product Code: 1001-3477)
ezPIC is low cost serial port programmer for PIC microcontroller and I2C EEPROM. The programmer does not need external power supply and it takes all necessary power and signal from RS232 Serial Port.
Features
* No external power supply required
* High quality 3M ZIF socket for easy insertion and removal of devices
* Software upgradeable for future PIC Microcontrollers
* Can program most PIC and I2C EEPROM devices
* In-Circuit Programming capability
* LED indication of Active programming mode.
- Using IC-Prog for Programming
1. Select appropriate PIC / EEPROM Device to be programmed
2. Load a file, Click on open file…
3. Put your device in the hardware at proper location and check for proper switch position.
4. Program All to write and verify the file into device.