ROBOTICS
کاربر فعال مهندسی رباتیک
olimex پروگرامر dspic
olimex for pic & dspic
The WinPIC software (free) is compatible with the JDM, just select JDM from the programming interface list. Programming is quite slow
Supported PIC microcontrollers
* dsPIC30F2010 (theoretically ALL dsPIC30F devices supported, a few tested)
dsPIC30F2010 dsPIC30F2011 dsPIC30F2012 dsPIC30F3010 dsPIC30F3011 dsPIC30F3012 dsPIC30F3013 dsPIC30F3014 dsPIC30F4011 dsPIC30F4012 dsPIC30F4013 dsPIC30F5011 dsPIC30F5013 dsPIC30F5015 dsPIC30F5016 dsPIC30F6010 dsPIC30F6010A dsPIC30F6011 dsPIC30F6011A dsPIC30F6012 dsPIC30F6012A dsPIC30F6013 dsPIC30F6013A dsPIC30F6014 dsPIC30F6014A dsPIC30F6015
* PIC16C61, PIC16C71
* PIC16C84, PIC16F84
* PIC16C710, PIC16C711, PIC16C715
* PIC10F200, PIC10F202, PIC10F204, PIC10F206
* PIC12F629, PIC12F635, PIC12F675, PIC12F683
* PIC12F609, PIC16F610, PIC12F615, PIC16F616 (new since 2007-06)
* PIC16F627, PIC16F627A, PIC16F628, PIC16F628A
* PIC16F630, PIC16F636, PIC16F648A
* PIC16F676, PIC16F684, PIC16F688
* PIC16F73, PIC16F737, PIC16F74, PIC16F76, PIC16F77
* PIC16F818, PIC16F819
* PIC16F87, PIC16F88
* PIC16F873A...PIC16F877A
* PIC16F88
* PIC18F242, PIC18F248, PIC18F252, PIC18F258
* PIC18F442, PIC18F448, PIC18F452, PIC18F458
* PIC18F2XX0/2XX5/4XX0/4XX5 (tested: PIC18F2550)
* and other "quite compatible" devices, if you have the datasheet and a text editor !
Features
* serial interface: compatible to the "COM84", "JDM", and user-defined
Most interfaces for the COM-port should work without a special port-access driver, and may even work with USB<->RS-232 adapters now !
* parallel interface: compatible with SM6LKM's "PIP84"-interface, check Johan's homepage
* many other interfaces can be driven with a simple interface definition file (see manual)
* possibility to verify the PIC at different voltages (almost "production grade")
* requires a PC with WIN95, Win98, Win XP (Win NT 4.0 and Win2000 not tested)
* Code memory size now up to 8192 words, data EEPROM memory up to 256 byte.
* Code and data memory may be programmed separately
* Bulk erase ("erase all") or individual programming of all bytes present in from HEX-file
* Built-in "hex editor" for quick patches in code or data EEPROM memory
* Invocation with command line arguments is possible, so you can run WinPic from a shell
* Extra window with "Reload & program" function (always in front of others)
* WinPic now also supports JDM PIC-programmer 2, Velleman K8048, the Hoodmicro, the Willem interface, El Cheapo, and many others. The only(?) interfaces which WinPic doesn't support are Microchip's "PicStart plus" (far too expensive) and "PicKit2" .
* Thanks to various collaborators, a French, Greek, Portugese, Spanish, and Turkish translation of WinPic's user interface is available. All languages are now contained in the installer (no need to download anything separately)
* Besides SMPORT, the PortTalk driver can be used. It proved to be faster under WinXP, especially when programming larger PICs (dsPIC and PIC18F).
http://freenet-homepage.de/dl4yhf/winpic/winpicpr.zip
DL4YHF's Software Archive:
WinPic - A PIC Programmer for Windows
last updated: June 3rd, 2007.
(support for dsPIC, PIC10F, new PIC12F6xx family, PIC16F9xx, PIC18F,
no need for SMPORT or PortTalk on COM-port any longer,
Czech, French, Greek, Portugese, Spanish, Russian and Turkish translation available)
Main Site: freenet-homepage.de/dl4yhf/winpicpr.html (< try this link if you are on the QSL.NET site !)
Backup site, usually too slow: www.qsl.net/dl4yhf/winpicpr.html .
So please change your WinPic links/bookmarks to the freenet address !
olimex for pic & dspic
The WinPIC software (free) is compatible with the JDM, just select JDM from the programming interface list. Programming is quite slow
Supported PIC microcontrollers
* dsPIC30F2010 (theoretically ALL dsPIC30F devices supported, a few tested)
dsPIC30F2010 dsPIC30F2011 dsPIC30F2012 dsPIC30F3010 dsPIC30F3011 dsPIC30F3012 dsPIC30F3013 dsPIC30F3014 dsPIC30F4011 dsPIC30F4012 dsPIC30F4013 dsPIC30F5011 dsPIC30F5013 dsPIC30F5015 dsPIC30F5016 dsPIC30F6010 dsPIC30F6010A dsPIC30F6011 dsPIC30F6011A dsPIC30F6012 dsPIC30F6012A dsPIC30F6013 dsPIC30F6013A dsPIC30F6014 dsPIC30F6014A dsPIC30F6015
* PIC16C61, PIC16C71
* PIC16C84, PIC16F84
* PIC16C710, PIC16C711, PIC16C715
* PIC10F200, PIC10F202, PIC10F204, PIC10F206
* PIC12F629, PIC12F635, PIC12F675, PIC12F683
* PIC12F609, PIC16F610, PIC12F615, PIC16F616 (new since 2007-06)
* PIC16F627, PIC16F627A, PIC16F628, PIC16F628A
* PIC16F630, PIC16F636, PIC16F648A
* PIC16F676, PIC16F684, PIC16F688
* PIC16F73, PIC16F737, PIC16F74, PIC16F76, PIC16F77
* PIC16F818, PIC16F819
* PIC16F87, PIC16F88
* PIC16F873A...PIC16F877A
* PIC16F88
* PIC18F242, PIC18F248, PIC18F252, PIC18F258
* PIC18F442, PIC18F448, PIC18F452, PIC18F458
* PIC18F2XX0/2XX5/4XX0/4XX5 (tested: PIC18F2550)
* and other "quite compatible" devices, if you have the datasheet and a text editor !
Features
* serial interface: compatible to the "COM84", "JDM", and user-defined
Most interfaces for the COM-port should work without a special port-access driver, and may even work with USB<->RS-232 adapters now !
* parallel interface: compatible with SM6LKM's "PIP84"-interface, check Johan's homepage
* many other interfaces can be driven with a simple interface definition file (see manual)
* possibility to verify the PIC at different voltages (almost "production grade")
* requires a PC with WIN95, Win98, Win XP (Win NT 4.0 and Win2000 not tested)
* Code memory size now up to 8192 words, data EEPROM memory up to 256 byte.
* Code and data memory may be programmed separately
* Bulk erase ("erase all") or individual programming of all bytes present in from HEX-file
* Built-in "hex editor" for quick patches in code or data EEPROM memory
* Invocation with command line arguments is possible, so you can run WinPic from a shell
* Extra window with "Reload & program" function (always in front of others)
* WinPic now also supports JDM PIC-programmer 2, Velleman K8048, the Hoodmicro, the Willem interface, El Cheapo, and many others. The only(?) interfaces which WinPic doesn't support are Microchip's "PicStart plus" (far too expensive) and "PicKit2" .
* Thanks to various collaborators, a French, Greek, Portugese, Spanish, and Turkish translation of WinPic's user interface is available. All languages are now contained in the installer (no need to download anything separately)
* Besides SMPORT, the PortTalk driver can be used. It proved to be faster under WinXP, especially when programming larger PICs (dsPIC and PIC18F).
http://freenet-homepage.de/dl4yhf/winpic/winpicpr.zip
DL4YHF's Software Archive:
WinPic - A PIC Programmer for Windows
last updated: June 3rd, 2007.
(support for dsPIC, PIC10F, new PIC12F6xx family, PIC16F9xx, PIC18F,
no need for SMPORT or PortTalk on COM-port any longer,
Czech, French, Greek, Portugese, Spanish, Russian and Turkish translation available)
Main Site: freenet-homepage.de/dl4yhf/winpicpr.html (< try this link if you are on the QSL.NET site !)
Backup site, usually too slow: www.qsl.net/dl4yhf/winpicpr.html .
So please change your WinPic links/bookmarks to the freenet address !
