.
ASM Handbook Volume 1-21
Book Description:
ASM Handbook, Vol. 01: Properties & Selection: Irons, Steels, and High-Performance Alloys
Sections include: Cast Irons, Carbon and Low-Alloy Steels, Harden ability of Carbon and Low-Alloy Steels, Fabrication Characteristics, Service Characteristics, Specialty Steels and Heat-Resistant Alloys, Materials Availability and Recycling.
ASM Handbook, Vol. 02:
* Publisher: ASM International
* Number Of Pages: 1328
* Publication Date: 1990-11
Book Description:
Properties & Selection: Nonferrous Alloys and Special-Purpose Materials
Sections include: Specific Metals and Alloys, Special-Purpose Alloys, Superconducting Materials, Pure Metals, Recycling, and Toxicity of Metals.
ASM Handbook, Vol. 03: Alloy Phase Diagrams (Asm Handbook)
* Publisher: ASM International
* Number Of Pages: 512
* Publication Date: 1992-12
Book Description:
ASM Handbook, Vol. 03: Alloy Phase Diagrams
The book also contains more than 1,000 binary diagrams, each plotted in weight percent (with atomic percent as an auxiliary scale) and accompanied by a table of crystallographic data. A binary alloy index lists all 20,779 systems and gives the most recent source for information about each. It also contains about 300 ternary diagrams, also plotted in a weight scale. The appendices include the melting and boiling points of the elements, their allotropic transformation and magnetic transition temperatures and their crystal structures.
ASM Handbook, Vol. 04: Heat Treating (Asm Handbook)
* Publisher: ASM International
* Number Of Pages: 1012
* Publication Date: 1991-06
Book Description:
ASM Handbook, Vol. 04: Heat Treating
You'll find all heat treating topics covered in this one essential volume. Contents include: Heat Treating of Steel--quenching, tempering and annealing, continuous annealing, quantitative methods to predict harden ability.
ASM Handbook, Vol. 05: Surface Engineering
* Publisher: ASM International
* Number Of Pages: 1056
* Publication Date: 1994-12
Book Description:
ASM Handbook, Vol. 05: Surface Engineering
You'll learn all the options available to improve the performance of metallic and selected nonmetallic parts along with procedures that can be utilized to enhance appearance and corrosion resistance, as well as wear, thermal, and electrical properties. You'll also find hundreds of tables, graphs, and charts that describe process parameters, solution compositions, operating conditions, specifications and the like along with numerous photographs and schematic drawings of processes and equipment.
ASM Handbook, Vol. 06: Welding, Brazing, and Soldering (Asm Handbook)
Author: Kelly Ferjutz Joseph R. Davis
Publisher: ASM International
Publication Date: 1994-01
Number Of Pages: 1299
Book Description
ASM Handbook, Vol. 06: Welding, Brazing and Soldering
Volume 6 is the most comprehensive reference book ever produced on the major joining technologies and their applications to engineered materials--90% of its contents are totally new to the ASM Handbook Series. With over 500 illustrations and 400 tables, this book includes practical advice on consumable selection and procedure development, as well as joining fundamentals
ASM Handbook, Volume 7: Powder Metal Technologies and Applications
ASM Handbook, Vol. 08: Mechanical Testing and Evaluation (Asm Handbook)
* Publisher: ASM International
* Number Of Pages: 998
* Publication Date: 2000-09
Book Description:
ASM Handbook, Vol. 08: Mechanical Testing and Evaluation
This newly revised and comprehensive ASM Handbook contains over 50 all-new articles plus newly revised updates on standard test methods for tensile, compressive, shear, hardness, creep, fatigue, and fracture-toughness properties. Expanded coverage also includes new articles on surface wear testing, adhesion testing, nano-mechanical testing, Hopkinson bar techniques, dynamic indentation testing, fatigue testing, residual-stress measurements, and extensive new coverage on the mechanical testing of engineering components such as gears, bearings, fasteners, adhesive-bonded joints, piping, and welds.
Asm Handbook vol 09: Metallography And Microstructures (ASM Handbook)
Author: (ASM Handbook)
ISBN: 0871707063
Pages: 1184 pages
Summary:
Metallography and Microstructures, Volume 9 of the ASM Handbook, is an essential reference for anyone who specifies, performs, monitors, evaluates, or uses metallurgical analyses for production quality control, research, or educational training. The new edition is a comprehensive reference that features over 30 new articles with substantive updates on metallographic techniques and microstructural interpretation. Expanded and new coverage includes:
>New articles on field metallography, digital imaging, and quantitative image analysis, quantitative metallography, and color metallography
>All-new articles on the metallography and microstructural interpretation of cast irons, carbon and low-alloy steels, aluminum alloys, precious-metal alloys, titanium alloys, ceramics, and thermal spray coatings
>Substantially revised articles on metallography and microstructural interpretation of tool steels, stainless steels, copper alloys, powder metallurgy alloys, and cemented carbides
>Hundreds of new micrographs throughout the volume
>More integrated in-text citation of micrograph images with respect to discussions on preparation techniques and alloy metallurgy
>Updated coverage on specimen-preparation techniques for both manual methods and semi-automatic machines
>Practical coverage on sectioning and specimen extraction
>New and revised articles on structures from solidification and solid-state transformations
>Laboratory safety guide
>New expanded color section
Metallography and Microstructures is an essential reference for anyone with an interest in the analysis of metals.
Metals Handbook vol 10: Materials Characterization (Asm Handbook)
* Publisher: ASM International
* Number Of Pages: 761
* Publication Date: 1989-11
Book Description:
ASM Handbook, Vol. 10: Materials Characterization
Provides you with an easily understood reference book on modern analytical techniques. It emphasizes the practical rather the theoretical, describing the most common applications and limitations of each method.
Asm Handbook vol 11: Failure Analysis and Prevention (ASM Handbook)
* Publisher: American Society for Metals
* Number Of Pages: 1164
* Publication Date: 2002-07
Book Description:
ASM Handbook, Vol. 11: Failure Analysis and Prevention
If you are a manufacturing engineer, component designer, a materials failure analyst, or if you have a general interest in the nature and prevention of engineering failures, you will be interested in the new and substantial revision of ASM Handbook, Volume 11, Failure Analysis and Prevention. The new Volume 11, with a focus on the root causes of failure, describes the principles, practices, and analytical techniques of failure analysis, so that root causes are properly identified and corrected for the ultimate objective of failure prevention.
Metals Handbook vol 12: Fractography (Asm Handbook)
* Publisher: ASM International
* Number Of Pages: 517
Book Description:
ASM Handbook, Vol. 12: Fractography
Provides engineers with enhanced capability for recognizing and interpreting the various features of a fracture, enabling you to perform improved failure analyses and to better determine the relationship of the fracture mode to the microstructure.
ASM Handbook Handbook, Ninth Edition: Volume 13 - Corrosion
ASM Handbook Handbook: Properties and Selection: Irons and Steels
By American Society for Metals
* Publisher: Asm Intl
* Number Of Pages:
* Publication Date: 1978
The book is organised into three main sections. The first deals with ferrous metals, covering carbon and alloy steels, cast irons and stainless steels. The more highly alloyed stainless steels, which are often classified as super stainless steels or as part of the body of corrosion resistant alloys (CRAs), are included as proprietary or non-standard stainless steels. This conforms to the approach used in the earlier volume but perhaps their importance could have warranted a separate section in this update.
The next section addresses non-ferrous metals and specialty products, giving an update on common and not-so-common metals and alloys. Many of the entries under specialty products were not in the original handbook, such as brazed and soldered joints, metallic coatings, clad and amorphous metals, and metal-matrix composites.
The third part on environmental performance of non-metallic materials is new. This could have been expanded further given the use of plastics, ceramics, refractories and concrete in aggressive applications. There is, for example, no chapter on thermoplastic materials. There is coverage of protective coatings and more information on organic coatings can be found in the ferrous metals section
Asm Handbook 13A: Corrosion : Fundamentals, Testing, and Protection (ASM Handbook)
Author: (ASM Handbook)
ISBN: 0871707055
Pages: 1135 pages
Summary:
ASM Handbook, Vol. 13A: Corrosion: Fundamentals, Protection and Prevention
The purpose of ASM Handbook, Volume 13A: Corrosion: Fundamentals, Testing, and Protection is to help engineers and designers understand corrosion so that they can solve existing corrosion problems and prevent future ones. It should be the first book you select when researching a corrosion problem. The coverage of the volume has been completely revised to ensure that it is the most comprehensive, practical, and up-to-date resource available. Each article is indexed to other appropriate sections of the Handbook, and each provides a road map to the thousands of individual bibliographical references that were used to compile the information.
ASM Metals Handbook, Vol. 14: Forming and Forging (#06360G)
By Joseph R. Davis, S. L. Semiatin, American Society for Metals,
* Publisher: ASM International
* Number Of Pages: 978
* Publication Date: 1989-04
Book Description:
ASM Handbook, Vol. 14: Forming and Forging
Provides an in-depth review of a number of processes recently introduced or that have come into acceptance such as radial, rotary (orbital), precision, powder, and isothermal/hot-die forging. Plus superplastic sheet forming, and abrasive waterjet and laser cutting. New materials in this book (containing 1,200 illustrations and 250 tables) pertains to the development of thermomechanical processing, particularly with regard to aerospace alloys, and the development of concepts and tests to determine metal workability/formability relationships.
Title: Asm Handbook vol 15: Casting (Asm Handbook)
Publication Date: 1988-07
Number Of Pages: 937
Book Description
ASM Handbook, Vol. 15: Casting
Gives you a thorough, yet easy-to-understand introduction to the principles of composition control, gas evolution in melts and inclusion-forming reactions, as well as the basic concepts of crystal growth and solidification that aids you with interpretation of structures. This volume discusses casting, molding and coremaking practices in a series of articles that describe the basic steps and equipment associated with each process, along with their advantages, limitations, and applications. Each article is preceded by a review of the manufacture, design and selection of patterns
ASM Handbook, Volume 16: Machining (Asm Handbook)
Publisher: ASM;
Publication Date: 1989;
ISBN 0-87170-022-0;
944 pages; 1,300 illustrations and 620 tables
You get detailed descriptions of specific machining and grinding processes, guidelines for proper selection of cutting tool materials and cutting fluids, and recommendations for improved productivity and efficiency during the machining of various materials. Twenty-one articles summarize the process capabilities, machines, cutting parameters plus variables, and applications of traditional machining processes such as turning, drilling, milling and the like. In the non-traditional category, you'll find 18 articles on mechanical, electrical, thermal, and chemical material removal procedures that have been developed. They yield improved workpiece quality and high production efficiency in the machining of hard, tough materials with unusual finishing requirements, as well as complex-shaped parts that require processing well beyond conventional methods.
Sections include: Fundamentals of Machining Process, Cutting Tool Materials, Cutting Fluids, Traditional Machining Processes, Grinding/Honing/Lapping, Non-Traditional Machining Processes, High Productivity Machining, Machine Controls and Computer Applications in Machining, Machining of Specific Metals and Alloys
Asm Handbook vol 17: Nondestructive Evaluation and Quality Control (Asm Handbook)
* Publisher: ASM International
* Number Of Pages: 795
* Publication Date: 1989-10
Book Description:
ASM Handbook, Vol. 17: Nondestructive Evaluation and Quality Control
Provides you with an easily understood, valuable reference of modern methods for nondestructive evaluation and statistical analysis. With the help of 1,100 illustrations and 150 tables, you'll learn how to select, use, and interpret nondestructive methods for evaluating the quality of parts and assemblies. The basic principles of each method along with its corresponding capabilities are outlined in 23 separate articles.
Asm Handbook vol 18: Friction, Lubrication, and Wear Technology (Asm Handbook)
By ASM, American Society for Metals,
* Publisher: ASM International
* Number Of Pages: 942
* Publication Date: 1992-07
Book Description:
ASM Handbook, Vol. 18: Friction, Lubrication, and Wear Technology
A significant, comprehensive and convenient reference on wear processes and prevention of damage.
ASM Handbook, Vol. 19: Fatigue and Fracture
* Publisher: ASM International
* Number Of Pages: 1057
* Publication Date: 1997-01
Book Description:
ASM Handbook, Vol. 19: Fatigue and Fracture
You'll learn about fatigue and fracture from both the fundamental and practical standpoint. It's the essential data necessary for you to make informed decisions on alloy design and material selection. You'll also gain valuable insight into fracture control, life assessment, and failure analysis.
ASM Handbook Volume 20: Materials Selection and Design
Product Description
Whether you're a seasoned engineering professional, an engineer just getting into the world of engineering, a nontechnical person involved in some aspect of manufacturing a product, or an engineering student with an eye on a bright future in industry, you will benefit from the information in Materials Selection and Design.
Materials Selection and Design is a comprehensive reference on the basic concepts, methodologies, and information sources dealing with materials selection and its integration with engineering design processes. It makes the connection between design and materials engineering.
Contents include contributions from 100+ experts from industry and universities involved with design, materials selection, and manufacturing.
Title: ASM Handbook Composites Volume 21
Author: Steven L. Donaldson / Daniel B. Miracle
ISBN: 0871707039
Publisher: ASM International
Edition: 10th edition (December 2001)
Language: English
Format: PDF
Pages: 1100 pages
Summary: ASM Handbook, Vol. 21: Composites
ASM Handbook, Volume 21: Composites provides a comprehensive, practical, and reliable source of technical knowledge, engineering data and supporting information for composite materials. This handbook is intended to be a resource volume for non-specialists who are interested in gaining a practical working knowledge of the capabilities and applications of composite materials. Thus, coverage emphasizes well-qualified and useful information for materials that can be produced in quantities and product forms of engineering significance. The full range of information of importance to the practical technologist is provided in this volume, including forms and properties of constituent materials, mechanics and design, processing, post-processing and assembly, testing and analysis, quality control, testing and certification, properties and performance, maintenance and repair, failure analysis, recycling and disposal, and applications.
عناوين اين مجموعه در ذيل آمده است:
جلد 1: خواص و انتخاب فولاد آهني و آلياژهاي با عملكرد عالي
جلد 2: خواص و انتخاب آلياژهاي غيرآهني و ويژه
جلد 3: دياگرام هاي فازي آلياژ
جلد 4: عمليات حرارتي
جلد 5: مهندسي سطح
جلد 6: جوشكاري، لحيم كاري سخت
جلد 7: تكنولوژي فلز پودري و كاربردهاي آن
جلد 8: ارزيابي و آزمايش مكانيكي
جلد 9: متالوگرافي و ريزساختارها
جلد 10: ويژگي هاي مواد
جلد 11: آناليز شكست و جلوگيري از آن
جلد 12: فراكتوگرافي
جلد 13: اصول خوردگي، آزمون ها و جلوگيري از آن
جلد 14: شكل دهي و فورجينگ (فورج كاري)
جلد 15: ريخته گري
جلد 16: ماشين كاري
جلد 17: ارزيابي و آزمايش هاي غيرمخرب و كنترل كيفيت
جلد 18: اصطكاك، روغن كاري يا روان كاري و تكنولوژي سايش
جلد 19: خستگي و شكست
جلد 20: انتخاب و طراحي مواد
جلد 21: كامپوزيت ها
ASM Handbook Volume 1-21
Book Description:
ASM Handbook, Vol. 01: Properties & Selection: Irons, Steels, and High-Performance Alloys
Sections include: Cast Irons, Carbon and Low-Alloy Steels, Harden ability of Carbon and Low-Alloy Steels, Fabrication Characteristics, Service Characteristics, Specialty Steels and Heat-Resistant Alloys, Materials Availability and Recycling.
ASM Handbook, Vol. 02:
* Publisher: ASM International
* Number Of Pages: 1328
* Publication Date: 1990-11
Book Description:
Properties & Selection: Nonferrous Alloys and Special-Purpose Materials
Sections include: Specific Metals and Alloys, Special-Purpose Alloys, Superconducting Materials, Pure Metals, Recycling, and Toxicity of Metals.
ASM Handbook, Vol. 03: Alloy Phase Diagrams (Asm Handbook)
* Publisher: ASM International
* Number Of Pages: 512
* Publication Date: 1992-12
Book Description:
ASM Handbook, Vol. 03: Alloy Phase Diagrams
The book also contains more than 1,000 binary diagrams, each plotted in weight percent (with atomic percent as an auxiliary scale) and accompanied by a table of crystallographic data. A binary alloy index lists all 20,779 systems and gives the most recent source for information about each. It also contains about 300 ternary diagrams, also plotted in a weight scale. The appendices include the melting and boiling points of the elements, their allotropic transformation and magnetic transition temperatures and their crystal structures.
ASM Handbook, Vol. 04: Heat Treating (Asm Handbook)
* Publisher: ASM International
* Number Of Pages: 1012
* Publication Date: 1991-06
Book Description:
ASM Handbook, Vol. 04: Heat Treating
You'll find all heat treating topics covered in this one essential volume. Contents include: Heat Treating of Steel--quenching, tempering and annealing, continuous annealing, quantitative methods to predict harden ability.
ASM Handbook, Vol. 05: Surface Engineering
* Publisher: ASM International
* Number Of Pages: 1056
* Publication Date: 1994-12
Book Description:
ASM Handbook, Vol. 05: Surface Engineering
You'll learn all the options available to improve the performance of metallic and selected nonmetallic parts along with procedures that can be utilized to enhance appearance and corrosion resistance, as well as wear, thermal, and electrical properties. You'll also find hundreds of tables, graphs, and charts that describe process parameters, solution compositions, operating conditions, specifications and the like along with numerous photographs and schematic drawings of processes and equipment.
ASM Handbook, Vol. 06: Welding, Brazing, and Soldering (Asm Handbook)
Author: Kelly Ferjutz Joseph R. Davis
Publisher: ASM International
Publication Date: 1994-01
Number Of Pages: 1299
Book Description
ASM Handbook, Vol. 06: Welding, Brazing and Soldering
Volume 6 is the most comprehensive reference book ever produced on the major joining technologies and their applications to engineered materials--90% of its contents are totally new to the ASM Handbook Series. With over 500 illustrations and 400 tables, this book includes practical advice on consumable selection and procedure development, as well as joining fundamentals
ASM Handbook, Volume 7: Powder Metal Technologies and Applications
ASM Handbook, Vol. 08: Mechanical Testing and Evaluation (Asm Handbook)
* Publisher: ASM International
* Number Of Pages: 998
* Publication Date: 2000-09
Book Description:
ASM Handbook, Vol. 08: Mechanical Testing and Evaluation
This newly revised and comprehensive ASM Handbook contains over 50 all-new articles plus newly revised updates on standard test methods for tensile, compressive, shear, hardness, creep, fatigue, and fracture-toughness properties. Expanded coverage also includes new articles on surface wear testing, adhesion testing, nano-mechanical testing, Hopkinson bar techniques, dynamic indentation testing, fatigue testing, residual-stress measurements, and extensive new coverage on the mechanical testing of engineering components such as gears, bearings, fasteners, adhesive-bonded joints, piping, and welds.
Asm Handbook vol 09: Metallography And Microstructures (ASM Handbook)
Author: (ASM Handbook)
ISBN: 0871707063
Pages: 1184 pages
Summary:
Metallography and Microstructures, Volume 9 of the ASM Handbook, is an essential reference for anyone who specifies, performs, monitors, evaluates, or uses metallurgical analyses for production quality control, research, or educational training. The new edition is a comprehensive reference that features over 30 new articles with substantive updates on metallographic techniques and microstructural interpretation. Expanded and new coverage includes:
>New articles on field metallography, digital imaging, and quantitative image analysis, quantitative metallography, and color metallography
>All-new articles on the metallography and microstructural interpretation of cast irons, carbon and low-alloy steels, aluminum alloys, precious-metal alloys, titanium alloys, ceramics, and thermal spray coatings
>Substantially revised articles on metallography and microstructural interpretation of tool steels, stainless steels, copper alloys, powder metallurgy alloys, and cemented carbides
>Hundreds of new micrographs throughout the volume
>More integrated in-text citation of micrograph images with respect to discussions on preparation techniques and alloy metallurgy
>Updated coverage on specimen-preparation techniques for both manual methods and semi-automatic machines
>Practical coverage on sectioning and specimen extraction
>New and revised articles on structures from solidification and solid-state transformations
>Laboratory safety guide
>New expanded color section
Metallography and Microstructures is an essential reference for anyone with an interest in the analysis of metals.
Metals Handbook vol 10: Materials Characterization (Asm Handbook)
* Publisher: ASM International
* Number Of Pages: 761
* Publication Date: 1989-11
Book Description:
ASM Handbook, Vol. 10: Materials Characterization
Provides you with an easily understood reference book on modern analytical techniques. It emphasizes the practical rather the theoretical, describing the most common applications and limitations of each method.
Asm Handbook vol 11: Failure Analysis and Prevention (ASM Handbook)
* Publisher: American Society for Metals
* Number Of Pages: 1164
* Publication Date: 2002-07
Book Description:
ASM Handbook, Vol. 11: Failure Analysis and Prevention
If you are a manufacturing engineer, component designer, a materials failure analyst, or if you have a general interest in the nature and prevention of engineering failures, you will be interested in the new and substantial revision of ASM Handbook, Volume 11, Failure Analysis and Prevention. The new Volume 11, with a focus on the root causes of failure, describes the principles, practices, and analytical techniques of failure analysis, so that root causes are properly identified and corrected for the ultimate objective of failure prevention.
Metals Handbook vol 12: Fractography (Asm Handbook)
* Publisher: ASM International
* Number Of Pages: 517
Book Description:
ASM Handbook, Vol. 12: Fractography
Provides engineers with enhanced capability for recognizing and interpreting the various features of a fracture, enabling you to perform improved failure analyses and to better determine the relationship of the fracture mode to the microstructure.
ASM Handbook Handbook, Ninth Edition: Volume 13 - Corrosion
ASM Handbook Handbook: Properties and Selection: Irons and Steels
By American Society for Metals
* Publisher: Asm Intl
* Number Of Pages:
* Publication Date: 1978
The book is organised into three main sections. The first deals with ferrous metals, covering carbon and alloy steels, cast irons and stainless steels. The more highly alloyed stainless steels, which are often classified as super stainless steels or as part of the body of corrosion resistant alloys (CRAs), are included as proprietary or non-standard stainless steels. This conforms to the approach used in the earlier volume but perhaps their importance could have warranted a separate section in this update.
The next section addresses non-ferrous metals and specialty products, giving an update on common and not-so-common metals and alloys. Many of the entries under specialty products were not in the original handbook, such as brazed and soldered joints, metallic coatings, clad and amorphous metals, and metal-matrix composites.
The third part on environmental performance of non-metallic materials is new. This could have been expanded further given the use of plastics, ceramics, refractories and concrete in aggressive applications. There is, for example, no chapter on thermoplastic materials. There is coverage of protective coatings and more information on organic coatings can be found in the ferrous metals section
Asm Handbook 13A: Corrosion : Fundamentals, Testing, and Protection (ASM Handbook)
Author: (ASM Handbook)
ISBN: 0871707055
Pages: 1135 pages
Summary:
ASM Handbook, Vol. 13A: Corrosion: Fundamentals, Protection and Prevention
The purpose of ASM Handbook, Volume 13A: Corrosion: Fundamentals, Testing, and Protection is to help engineers and designers understand corrosion so that they can solve existing corrosion problems and prevent future ones. It should be the first book you select when researching a corrosion problem. The coverage of the volume has been completely revised to ensure that it is the most comprehensive, practical, and up-to-date resource available. Each article is indexed to other appropriate sections of the Handbook, and each provides a road map to the thousands of individual bibliographical references that were used to compile the information.
ASM Metals Handbook, Vol. 14: Forming and Forging (#06360G)
By Joseph R. Davis, S. L. Semiatin, American Society for Metals,
* Publisher: ASM International
* Number Of Pages: 978
* Publication Date: 1989-04
Book Description:
ASM Handbook, Vol. 14: Forming and Forging
Provides an in-depth review of a number of processes recently introduced or that have come into acceptance such as radial, rotary (orbital), precision, powder, and isothermal/hot-die forging. Plus superplastic sheet forming, and abrasive waterjet and laser cutting. New materials in this book (containing 1,200 illustrations and 250 tables) pertains to the development of thermomechanical processing, particularly with regard to aerospace alloys, and the development of concepts and tests to determine metal workability/formability relationships.
Title: Asm Handbook vol 15: Casting (Asm Handbook)
Publication Date: 1988-07
Number Of Pages: 937
Book Description
ASM Handbook, Vol. 15: Casting
Gives you a thorough, yet easy-to-understand introduction to the principles of composition control, gas evolution in melts and inclusion-forming reactions, as well as the basic concepts of crystal growth and solidification that aids you with interpretation of structures. This volume discusses casting, molding and coremaking practices in a series of articles that describe the basic steps and equipment associated with each process, along with their advantages, limitations, and applications. Each article is preceded by a review of the manufacture, design and selection of patterns
ASM Handbook, Volume 16: Machining (Asm Handbook)
Publisher: ASM;
Publication Date: 1989;
ISBN 0-87170-022-0;
944 pages; 1,300 illustrations and 620 tables
You get detailed descriptions of specific machining and grinding processes, guidelines for proper selection of cutting tool materials and cutting fluids, and recommendations for improved productivity and efficiency during the machining of various materials. Twenty-one articles summarize the process capabilities, machines, cutting parameters plus variables, and applications of traditional machining processes such as turning, drilling, milling and the like. In the non-traditional category, you'll find 18 articles on mechanical, electrical, thermal, and chemical material removal procedures that have been developed. They yield improved workpiece quality and high production efficiency in the machining of hard, tough materials with unusual finishing requirements, as well as complex-shaped parts that require processing well beyond conventional methods.
Sections include: Fundamentals of Machining Process, Cutting Tool Materials, Cutting Fluids, Traditional Machining Processes, Grinding/Honing/Lapping, Non-Traditional Machining Processes, High Productivity Machining, Machine Controls and Computer Applications in Machining, Machining of Specific Metals and Alloys
Asm Handbook vol 17: Nondestructive Evaluation and Quality Control (Asm Handbook)
* Publisher: ASM International
* Number Of Pages: 795
* Publication Date: 1989-10
Book Description:
ASM Handbook, Vol. 17: Nondestructive Evaluation and Quality Control
Provides you with an easily understood, valuable reference of modern methods for nondestructive evaluation and statistical analysis. With the help of 1,100 illustrations and 150 tables, you'll learn how to select, use, and interpret nondestructive methods for evaluating the quality of parts and assemblies. The basic principles of each method along with its corresponding capabilities are outlined in 23 separate articles.
Asm Handbook vol 18: Friction, Lubrication, and Wear Technology (Asm Handbook)
By ASM, American Society for Metals,
* Publisher: ASM International
* Number Of Pages: 942
* Publication Date: 1992-07
Book Description:
ASM Handbook, Vol. 18: Friction, Lubrication, and Wear Technology
A significant, comprehensive and convenient reference on wear processes and prevention of damage.
ASM Handbook, Vol. 19: Fatigue and Fracture
* Publisher: ASM International
* Number Of Pages: 1057
* Publication Date: 1997-01
Book Description:
ASM Handbook, Vol. 19: Fatigue and Fracture
You'll learn about fatigue and fracture from both the fundamental and practical standpoint. It's the essential data necessary for you to make informed decisions on alloy design and material selection. You'll also gain valuable insight into fracture control, life assessment, and failure analysis.
ASM Handbook Volume 20: Materials Selection and Design
Product Description
Whether you're a seasoned engineering professional, an engineer just getting into the world of engineering, a nontechnical person involved in some aspect of manufacturing a product, or an engineering student with an eye on a bright future in industry, you will benefit from the information in Materials Selection and Design.
Materials Selection and Design is a comprehensive reference on the basic concepts, methodologies, and information sources dealing with materials selection and its integration with engineering design processes. It makes the connection between design and materials engineering.
Contents include contributions from 100+ experts from industry and universities involved with design, materials selection, and manufacturing.
Title: ASM Handbook Composites Volume 21
Author: Steven L. Donaldson / Daniel B. Miracle
ISBN: 0871707039
Publisher: ASM International
Edition: 10th edition (December 2001)
Language: English
Format: PDF
Pages: 1100 pages
Summary: ASM Handbook, Vol. 21: Composites
ASM Handbook, Volume 21: Composites provides a comprehensive, practical, and reliable source of technical knowledge, engineering data and supporting information for composite materials. This handbook is intended to be a resource volume for non-specialists who are interested in gaining a practical working knowledge of the capabilities and applications of composite materials. Thus, coverage emphasizes well-qualified and useful information for materials that can be produced in quantities and product forms of engineering significance. The full range of information of importance to the practical technologist is provided in this volume, including forms and properties of constituent materials, mechanics and design, processing, post-processing and assembly, testing and analysis, quality control, testing and certification, properties and performance, maintenance and repair, failure analysis, recycling and disposal, and applications.
عناوين اين مجموعه در ذيل آمده است:
جلد 1: خواص و انتخاب فولاد آهني و آلياژهاي با عملكرد عالي
جلد 2: خواص و انتخاب آلياژهاي غيرآهني و ويژه
جلد 3: دياگرام هاي فازي آلياژ
جلد 4: عمليات حرارتي
جلد 5: مهندسي سطح
جلد 6: جوشكاري، لحيم كاري سخت
جلد 7: تكنولوژي فلز پودري و كاربردهاي آن
جلد 8: ارزيابي و آزمايش مكانيكي
جلد 9: متالوگرافي و ريزساختارها
جلد 10: ويژگي هاي مواد
جلد 11: آناليز شكست و جلوگيري از آن
جلد 12: فراكتوگرافي
جلد 13: اصول خوردگي، آزمون ها و جلوگيري از آن
جلد 14: شكل دهي و فورجينگ (فورج كاري)
جلد 15: ريخته گري
جلد 16: ماشين كاري
جلد 17: ارزيابي و آزمايش هاي غيرمخرب و كنترل كيفيت
جلد 18: اصطكاك، روغن كاري يا روان كاري و تكنولوژي سايش
جلد 19: خستگي و شكست
جلد 20: انتخاب و طراحي مواد
جلد 21: كامپوزيت ها
آخرین ویرایش:
